Hi,
I have added the Modul and start the Wizard.
Now I have a critical Error(Request failed).
Any solutuon?

Thank you for help and the fine Modul
Bernd

Buitel,

Can check the DNN EventViewer and see if there is an error message from around the same time when you attempted to run the Wizard? Please post what you find.

Thanks,
-Eric

Good morning Eric,
thank's for fast reply.
Here is is my protocol:

AssemblyVersion: 04.05.01
PortalID: 0
PortalName: Advanced-web.de
UserID: 1
UserName: host
ActiveTabID: 37
ActiveTabName: Home
RawURL: /Home/tabid/37/ctl/Wizard/mid/465/Default.aspx
AbsoluteURL: /Default.aspx
AbsoluteURLReferrer: http://www.advanced-web.de/Home/tabid/37/Default.aspx
UserAgent: Mozilla/5.0 (Windows; U; Windows NT 6.0; de; rv:1.8.1.3) Gecko/20070309 Firefox/2.0.0.3
DefaultDataProvider: DotNetNuke.Data.SqlDataProvider, DotNetNuke.SqlDataProvider
ExceptionGUID: a9172d0a-87d6-4c64-8716-ddec2fce5cdb
InnerException: Request failed.
FileName:
FileLineNumber: 0
FileColumnNumber: 0
Method: Bi4ce.GoMap.RuntimeSettings.ToString
StackTrace:
Message: DotNetNuke.Services.Exceptions.PageLoadException: Request failed. ---> System.Security.SecurityException: Request failed. at Bi4ce.GoMap.RuntimeSettings.ToString(HttpApplicationState Application) at Bi4ce.GoMap.Wizard.set_Runtime(RuntimeSettings Value) at Bi4ce.GoMap.Wizard.Page_PreRender(Object sender, EventArgs e) at System.Web.UI.Control.OnPreRender(EventArgs e) at System.Web.UI.Control.PreRenderRecursiveInternal() at System.Web.UI.Control.PreRenderRecursiveInternal() at System.Web.UI.Control.PreRenderRecursiveInternal() at System.Web.UI.Control.PreRenderRecursiveInternal() at System.Web.UI.Control.PreRenderRecursiveInternal() at System.Web.UI.Control.PreRenderRecursiveInternal() at System.Web.UI.Control.PreRenderRecursiveInternal() at System.Web.UI.Control.PreRenderRecursiveInternal() at System.Web.UI.Control.PreRenderRecursiveInternal() at System.Web.UI.Control.PreRenderRecursiveInternal() at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) The action that failed was: Demand The type of the first permission that failed was: System.Security.PermissionSet The Zone of the assembly that failed was: MyComputer --- End of inner exception stack trace ---
Source:
Server-Name: QHSWEB7

Hope this helps.
Bernd

I suspect this may be a localization issue. Can you try installing GoMap on a DNN instance without multiple languages installed? We have tried to replicate the issue by installing a second language on a 4.5.1 but cannot replicate your error message.

Can you go to your HostSettings page and tell me what are the permissions that you see?

Hi Eric,
on DNN without multiple Language is the same problem.
On Hostsetting Page there is a point "Permissions = WebPermission".

Bernd

It appears that the XmlSerializer is having a problem running for your module. Can you make sure that your DNN instance is running with full trust.

How can I do that?

We have reproduced the error by running GoMap on a DNN instance running in Medium Trust. It turns out that in .NET 2.0, the XmlSerializer constructor is very particular about the way it is called under Medium trust. See this page for an example of the type of changes that must be made to support medium trust: http://forums.asp.net/thread/1178514.aspx

OK, DNN is running in Medium Trust. The XmlSerializer changes are corrected since 4.0.1. . So what can I do? Did your modul use outbound connection via udp or tcp? This does not work with medium trust I think.
What about the section



in the web.config
Could changes help?

Regards
Bernd

set code access security trust level - this is generally set in the machine.config

   

set code access security trust level - this is generally set in the machine.config  
trust level="Medium" originUrl=".*"

Sorry
Bernd

We are working on putting together a new build that will work in a medium trust level environment. As long as you have IOPermissions to write to your module folder (for saving your GoMap configuration settings), the new build should work for you.

Nice to hear.
Thank you.

Bernd

We have just posted 02.08.01 that should address the medium trust issue. Also, we found a few queries that were missing correct table name prefixes so we fixed that issue as well.

Yes!!!! Now it works.

Thank you Eric.